Investigation into the possibility of using a novel ionic liquid leaching method to obtain vanadium from vanadium slag

POTGIETER, Johannes Herman; TEIMOURI, Samaneh

doi:10.35208/ert.1150621

Johannes Herman POTGIETER ¹

, Samaneh TEIMOURI ²

¹School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, South Africa; Department of Natural Sciences, Faculty of Science and Engineering, Manchester Metropolitan University, Chester Street, Manchester, UK
²School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, South Africa

Environmental Research & Technology 2023; 1(6): 1-7 DOI: 10.35208/ert.1150621

Full Text PDF

Abstract

An environmentally friendly, novel method for extracting vanadium from slag with two imidazolium-based ionic liquids, namely1-butyl-3-methylimidazolium trifluoromethane sulfonate
[Bmim+CF3SO3-], and 1-butyl-3-methyl-imidazolium hydrogen sulfate [Bmim+HSO4-], before and after magnetic separation, was proposed in this study. The effect of the type of ionic liquid, the concentration of ionic liquid, temperature and liquid to solid ratio were examined. The optimum experimental condition after examining these influential factors was found to be: ionic
liquid [Bmim+HSO4-] 50% (v/v), a leaching temperature of 100 oC, and a liquid to solid ratio of 12 ml/g (12:1), at a leaching time of 90 min, with shaking speed of 250 rpm. The results indicated
that a maximum vanadium extraction of 94.2% with 57.6% iron as an impurity could be achieved from the non-magnetic slag fraction. The kinetics of vanadium dissolution in 50% (v/v)
[Bmim+HSO4-] was governed by a surface chemical reaction with an estimated Ea= 65.5 kJ/mol.

Keywords: Vanadium slag; Ionic liquids; Vanadium extraction; Iron extraction; Pollution reduction